MoTip spray paint heat resistant anthracite 400ml (till 650 degrees)

MoTip spray paint heat-resistant anthracite 400ml (up to 650 degrees)

Heat-resistant lacquer to treat treated and untreated surfaces exposed to very high temperatures. The lacquer is resistant to petrol, chemicals and weather influences.

• Ideal for exhausts, cylinders, carters, etc.
• 400ml

Product characteristics

• Heat-resistant
• Excellent adhesion
• Resistant to petrol, chemicals and weather influences

Physical and chemical properties

• Content: 400 ml
• Basis: Silicone resin
• VOC content: Approx. 84% w/w
• Solids: Approx. 16% w/w
• Gloss: matt
• Yield: 1.25 to 1.75 m²
• Dust-dry: After 5 to 10 minutes
• Stick-free: After 10 to 15 minutes
• Hardened: after 30 to 60 minutes (160°C)
• Heat resistant: up to 650°C 

Instructions for use

• Before use, carefully read and follow the instructions on the packaging.

Preliminary treatment

• The substrate must be clean, dry and grease-free. Remove loose old paint residues and rust and lightly sand the surface. Do not apply a primer.

Varnishing

• The substrate must be clean, dry and grease-free. Bring the spray can to room temperature. Ideal application temperature 15 to 25 °C. Shake aerosol for 2 minutes before use and spray a test piece sample.
• Distance to the surface to be treated approx. 25 to 30 centimetres. Apply the heat resistant lacquer in several thin layers. Before applying the next layer, shake the aerosol again.
• Leave to dry for one hour at room temperature. Then heat for 30 to 60 minutes (160 °C) to harden the varnish layer. During the curing process, smoke is generated from the lacquer.
• After use, spray the valve clean (hold the spray can upside down and press the nozzle for approx. 5 seconds).
• The drying time depends on the ambient temperature, the humidity and the applied layer thickness