Exhaust standard model / Tecno
- Tomos A3 / A35 / Standard / Quadro / Flexer / Luxe / Wizz'rd / Taxxity / Califone / Limited
- Black, fast version 26mm.
- Small scratches are possible
- This exhaust has an shorter manifold. If you have an 2007+ model Tomos, we recommend you to use the Euro2 version which has an longer manifold.
- Exhaust mounting to frame Euro1 model
Tips:
- Use our long brass M6 nuts in combination with hardened studs (see related products). This so you can easily and fully tighten the exhaust flange. Brass is also softer than steel, so it will not seize.
- Always use a new exhaust gasket when fitting an exhaust
When using all exhausts, black painted, chrome and blanc exhausts, heat build-up at the exhaust manifold can cause the following:
- At black outlets the paint can dissolve a little.
- Chrome and blanc exhaust manifolds may discolour
If the nozzle is too small or if the ignition is set incorrectly, the exhaust port becomes very hot and discoloring and dissolve of the paint on the exhaust manifold will occur faster than a perfectly adjusted engine. We give no guarantee on discoloration or solving of the paint on the exhaust manifold!
Dimensions:
- A: 350mm
- B: 490mm
- C: 23mm
- D: 26mm
- E: 5mm